Do you have a small discolored spot on your screen that won’t go away? There’s a high possibility you’ve got a stuck or dead pixel. So, what’s next? Firstly, stop staring at your monitor, figuring how much time you’ll miss if you send it in for repair or replacement. You’ve already squandered too much time lamenting the loss of a “dead” pixel, which is both inconsequential and vexing.
So, take matters into your own hands and figure out “How to Fix Red Pixels on Monitor” on your own! If done correctly, this will not void your warranty and will likely save you a lot of time and trouble.
You can solve the problem on your own by reading this article. Now, delve deeply into this and allow yourself to feel stress-free.
Check to see if the pixel is trapped rather than dead.
While the terms “stuck” and “dead” are frequently interchanged when referring to faulty pixels, stuck pixels can be rectified, whereas dead pixels cannot. Your pixel is most likely stuck if it displays a color other than black or changes color depending on the background.
- Regardless of what’s on the screen, dead pixels are always black or white. White pixels are referred to as “hot” pixels, yet they are essentially the same as dead pixels.
- If you find a dead pixel on your monitor, you’ll either need to take it to a repair shop or replace it. If it’s still under warranty, you should be able to get it replaced.
Turn off your monitor for 24 hours.
If your monitor’s pixel has lately become stuck, turning it off for a full day may help. This isn’t a foolproof cure, but a stuck pixel is frequently a sign of excessive use, therefore your monitor should be turned off for a bit to avoid further damage.
- Likewise, unplug the monitor.
Be aware that the pixel may self-correct. Stuck pixels usually vanish after a certain amount of time, which can range from days to years. If you only have one stuck pixel on an expensive screen, you should avoid pressing, scratching, or otherwise touching the monitor to try to fix it.
How to Restore Pixels that are Dead or Stuck
You can’t fix a dead pixel, unfortunately. A trapped pixel, on the other hand, can be fixed. It’s difficult to tell the two differences, as I previously stated. In any case, here are some options for you to consider:
- First, look for dead or stuck pixels by switching between different color palettes on your monitor.
- Use a third-party tool to flash the pixel with numerous colors to repair a stuck or dead-looking pixel. We suggest using UDPixel (Windows) or LCD (online).
- Lastly, rubbing the trapped pixel with a moist cloth or a sharp but soft item, such as the rubber/eraser at the end of a pencil, is a manual way.
Let’s take a closer look at these strategies and tools.
- Start the web app, then drag the flashing box over the broken pixel and leave it there.
- In less than 20 minutes, the app can fix the majority of the stuck pixels. According to some users, JScreenFix can even fix dead pixels!
- JScreenFix claims to have a success rate of more than 60% in recovering the trapped pixels. If the first time you used it didn’t work out, try again.
- It runs smoothly on Windows, Mac OS X, Android, and iOS.
- It’s a useful tool that can help you discover and repair stuck/dead pixels.
- The section under “Dead Pixels Locator” is helpful in locating stuck or dead pixels. There are eight color buttons on the device, each of which displays a distinct color on the screen.
- After you’ve found the stuck pixel, select “Color mode,” press “Go!” and position the flashing window beneath it.
- After 30 minutes, check to see if the pixel has been corrected. If required, repeat the process a few times.
- The tool uses fewer system resources and operates more quickly.
It’s a useful app for resolving stuck pixels.
This free app has a user interface that is self-explanatory and simple to use. Just follow the directions on the screen.
Allow at least 30 minutes for the app to run before closing it. If required, repeat the procedure.
There are much too many advertising in this app. So, before you run the app, make sure the Internet is turned off.
Remember that screen-fixing software normally has a success rate of more than 50%. As a result, it cannot be guaranteed to operate every time.
Manually Repairing Stuck Pixels
Here’s a last option if none of these tools fix your stuck or dead pixel problem. Any of the tools listed above can be combined with the magical power of your own hands.
Let’s have a look at one strategy in particular:
- Your monitor should be turned off.
- To avoid scratching the screen, take a moist towel and wipe it down.
- Apply pressure to the stuck pixel’s location. Avoid putting pressure to any other part of the screen, as this may cause more stuck pixels to appear.
- Turn on your computer and screen while exerting pressure.
- When you release the pressure, the trapped pixel should vanish.
This works because the liquid in one or more of the sub-pixels of a stuck pixel hasn’t distributed evenly. When the lighting on your screen turns on, different amounts of liquid move through the pixel, resulting in distinct colors. When you exert pressure, the liquid is forced out, and when you remove it, the liquid is likely to push back in, distributing evenly as it should.
Also Read: How To Move Task Manager To Other Monitor
Concerns About the Warranty
If you’re having trouble unsticking the pixel, it could be time to seek professional help. They might be able to assist you in resolving a monitor’s stuck red pixels. Under the warranty card, you can access a variety of services for your monitor. So, if you’re still inside the warranty term, you should use the card to repair or replace your monitor. If there are only one or two stuck pixels on your monitor, you may not be able to get them serviced via warranty card services, as most manufacturers only offer warranty services for stuck red pixels on monitors with five or more.
All Pixels Send Information to the Screen.
If none of these methods work, you now know it’s not easy to fix a dead pixel fighter, and you may have to replace the screen entirely.