The presence of speakers on a laptop enables the operating system to audibly announce notifications and other communications. Additionally, speakers create surround sound and, when paired with a subwoofer, provide additional bass.
So, if you dislike or refuse to use internal laptop speakers, you can disable them. Lastly, I’ll show you how to disable laptop speakers but not headphones. This is a straightforward and expedient Window 10 approach.
Please keep in mind that the steps below apply only to Windows 10. If you’re using Windows 7, you can disable laptop speakers via the control panel.
Whether your laptop displays an internal speaker, headphones, or external speakers as a sound device, they are all connected to it.
It allows you to separate and disable laptop speakers independently, allowing you to continue utilizing other sound output devices such as headphones or external speakers after the internal laptop speaker has been turned off.
Note: If you have many audio outputs connected to your laptop, such as external speakers, wired or wireless headphones, and etc, I suggest temporarily unplugging them to avoid confusion.
To begin, press the “start key + 1′′ shortcut to launch the window settings app. You can also use the start menu to look for and access” settings.” Navigate to the “system – sound” page after opening the setting app.
Click the “Manage Sound Devices” link on the sound page beneath the output area. It’s here that you’ll find all of the wonderful device options.
Next, select the laptop speaker’s entry. Disconnect all other speaker equipment to manage the part if you have numerous sound output devices and aren’t sure which one is a laptop speaker.
Disable the feature by clicking the “Disable” button. The laptop’s sound will be turned off at this stage.
This concludes the discussion. Disabling the speaker on a Windows 10 laptop is that simple. Only the laptop speakers have been disabled, as previously stated; all other sound devices are normally operational.
The control panel can also be used to deactivate or disable the laptop’s internal speakers. For further information, simply follow the steps.
Step:1 To begin, go to the control panel, then to “Sound and Hardware.”
Step:2 Then, from the menu, select “Manage Sound Audio Devices.”
Step:3 Select “Devices” and then “Speakers.” Now you can easily disable the laptop’s internal speakers by clicking the disable option on the screen.
Step:4 Finally, pick the “Apply and OK” option that appears when you complete the third step.
Step:5 With your headphones plugged in, you may now enjoy your movies, tunes, games, and whatever else you desire.
If the preceding methods do not work for your laptop, you can use BIOS to stop laptop speakers but not headphones. Disable laptop speakers but not headphones by following the procedures below.
Step:1 First, go to “Settings” and then “Update and Security.” This will get you started.
Step:2 Choose “Recovery” and then “Advanced Startup” from the drop-down menu.
Step:3 Select “Reset Now,” then “Fix,” and finally “Advanced Options” from the drop-down menu.
Step:4 Then go to Windows and select “UEFI Firmware Settings,” finally “Restart,” and then “System Configuration.”
Step 5: From the menu, choose “Audio” and disable “Enable Internal Audio.”
Step:6 Finally, click “Apply” and then “Exit.” The settings that disable the laptop’s internal speakers will be saved as a result of this.
Yes, it is possible to damage your speakers by playing music too loudly. There are a couple more possibilities for this calamity to happen on your watch that you should be aware of. The source of overpowering low-frequency speakers or subwoofers is either electrical or mechanical.
Excessive power is given to the subwoofers, causing the voice coils to burn out, resulting in electrical failure. This is why you should always check the gain levels and wiring of your subwoofers before your session. The term “mechanical failure” refers to when the speaker physically rips or tears.
Connect the headphones and speakers on your computer. Select Sounds from the right-click menu of the volume icon on the taskbar. It brings up the Sound options. Make a right-click selection of Speakers on the Playback tab, and then select “Set as Default Device.”
When it comes to the common attractions present in our offices, a magnet will not cause any damage to your laptop. An appeal can erase your computer’s hard disc, but it would need a powerful magnet to do so.
Thus, you now understand “how to disable laptop speakers but not headphones”. The procedure is so straightforward that even non-technical men can follow along. Additionally, by repeating the same procedure, the speakers can be enabled.
Without a doubt, the article has addressed all of your concerns. However, if you have any questions or encounter any difficulties, you can contact us by leaving a comment below. Our experts will attempt to respond to your query.
READ MORE –